270 WSM (WINCHESTER SHORT MAGNUM) NICKEL cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Visually Checked. 10) Packed by weight with humidity absorbing packet and sealed.
270 WSM (WINCHESTER SHORT MAGNUM) NICKEL cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Visually Checked. 10) Packed by weight with humidity absorbing packet and sealed.
270 WSM (WINCHESTER SHORT MAGNUM) NICKEL cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Visually Checked. 10) Packed by weight with humidity absorbing packet and sealed.
270 WSM (WINCHESTER SHORT MAGNUM) NICKEL cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Visually Checked. 10) Packed by weight with humidity absorbing packet and sealed.

270 WSM (WINCHESTER SHORT MAGNUM) NICKEL

  • En solde
  • $70.00
Les douilles en laiton 270 WSM WINCHESTER SHORT MAGNUM NICKEL sont d'origines mixte des fabricants et ont été réusinées commes suit; 1) Lavées. 2) Inspection visuelle et défauts évidents rejetées. 3) Désamorcées. 4) Lavage avec aiguillettes d'acier inoxydable. 5) Contrôle visuelle et rejets de défauts plus fins. 6) Redimensionnées pleine longueur. 7) Taillage de longueur et chanfreins du collet. 8) Chanfrein du logement d'amorce. 9)Contrôle visuelle final. 11) Emballées au poids avec un sachet dessicant puis scellées. 50 unitées min/boîtes.