30-06 SPRINGFIELD Brass cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Neck annealed for longer case life. 10) Visually Checked. 11) Packed by weight with humidity absorbing packet and sealed.
30-06 SPRINGFIELD Brass cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Neck annealed for longer case life. 10) Visually Checked. 11) Packed by weight with humidity absorbing packet and sealed.
30-06 SPRINGFIELD Brass cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Neck annealed for longer case life. 10) Visually Checked. 11) Packed by weight with humidity absorbing packet and sealed.
30-06 SPRINGFIELD Brass cases have been processed as follows and are of mixed manufacturer's origin: 1) Tumble-washed. 2) Visual Inspection and obvious defects sorted out. 3) Deprimed. 4) Tumble-washed with stainless pins. 5) Visual check and finer defects sorted out. 6) Full length resized. 7) Length-trimmed and case mouth chamfered. 8) Primer pocket chamfered. 9) Neck annealed for longer case life. 10) Visually Checked. 11) Packed by weight with humidity absorbing packet and sealed.

30-06 SPRINGFIELD

  • En solde
  • $52.00
Les douilles en laiton 30-06 SPRINGFIELD sont d'origine mixte des fabricants et ont été réusinées commes suit; 1) Lavées. 2) Inspection visuelle et défauts évidents rejetées. 3) Désamorcées. 4) Lavage avec aiguillettes d'acier inoxydable. 5) Contrôle visuel et rejets des défauts les plus fins. 6) Redimensionnées pleine longueur. 7) Taillage de longueur et chanfreins du collet. 8) Chanfrein du logement d'amorce. 9) Collet recuits pour un plus longue durée de vie. 10)Contrôle visuel final. 11) Emballées au poids avec un sachet dessicant puis scellées. 50 unitées min/boîtes.